Baltimore City & County · Remodeling Since 2005

Flooring Installation in Baltimore, MD

Hardwood refinishing, new hardwood, luxury vinyl plank, laminate, tile and carpet for Baltimore rowhouses, detached homes and condos, installed by a local crew from just outside the city line.

MHIC #123700 Licensed & Insured ★ 4.9 Homeowner Rating 20+ Years in Central Maryland
Floors for Baltimore Homes

New and restored floors, from rowhouses to condos

Baltimore’s housing changes block by block. Brick rowhouses line the streets of Canton, Fells Point, Federal Hill, Hampden and Charles Village, while Roland Park, Mount Washington, Lauraville and Hamilton have more detached houses with porches and yards. Downtown and around the harbor, many people live in condos and lofts in converted buildings. Each of these asks something different of a floor. An older rowhouse may have its original wood floors hidden under carpet or vinyl, often worth sanding and refinishing. A rowhouse lower level or a busy kitchen usually calls for luxury vinyl plank or tile that can handle moisture. A condo may need a sound-reducing underlayment to meet building rules. Our flooring installation team works out of our Catonsville office, right next to the city’s western edge, and handles each of these jobs.

20+ Years
In business since 2005
Design-Build
Floors planned with your remodel
Licensed
MHIC #123700 & fully insured
4.9★
Average homeowner rating
What We Install

Flooring we install in Baltimore

Hardwood refinishing & repair

Sanding, board replacement and stain-matching for original wood floors, so patched areas blend in with the rest of the room.

New hardwood

Solid and engineered hardwood laid through a whole level or woven into existing floors where walls have come out.

Luxury vinyl plank (LVP)

Water-resistant wood looks for kitchens, baths, rowhouse lower levels and rentals that see heavy use.

Laminate

A firm, budget-friendly wood look for living rooms, bedrooms and upper floors where water is not a concern.

Tile & natural stone

Porcelain, ceramic and stone for baths, kitchens, entries and mudrooms, set on a properly prepared base.

Carpet & stair runners

Bedrooms, basements and the steep stairs found in many rowhouses, with the pad matched to the room.

Our Work

Floors that tie a house together

A single floor running through the main level makes a narrow house feel larger and keeps the rooms connected.

Kitchen and dining area with hardwood flooring installed by Wall to Wall Construction
Hardwood carried from the kitchen into the dining area.
Family room with light oak flooring and large windows by Wall to Wall Construction
Light oak flooring in a family room.
Why Wall to Wall

A flooring crew that knows older city houses

  • Refinish first when it makes sense. We check board thickness and damage, and if refinishing will do the job we say so, because it usually costs far less than new flooring.
  • Subfloor checked first. Older houses settle. We look for sagging, soft spots and squeaks before quoting and fix them so the new floor stays flat.
  • Planned for narrow spaces. Rowhouse stairs and halls are tight, so we plan deliveries and cuts around them and protect walls and banisters.
  • Condo rules reviewed up front. We check your building’s underlayment, work-hour and elevator rules before the job is scheduled.

See our flooring gallery ›

Game room with dark hardwood floors and large windows remodeled by Wall to Wall Construction
How It Works

Our flooring installation process

Inspect

We look at the floor you have and what is under it, then tell you whether to refinish, repair or replace.

Samples & proposal

You see samples in your own light and get an itemized proposal you can read line by line.

Prep

We protect the house, move furniture, pull up old flooring and repair or level the subfloor.

Install or refinish

Our crew installs to the manufacturer’s instructions or sands and finishes the original floor.

Walkthrough

We check seams, transitions and trim with you and leave care instructions for your new floor.

One Contract, One Team

What’s included in every flooring job

One point of contact from the first visit to the final walkthrough.

In-home inspection Samples & selection help Moisture testing Furniture moving Old floor removal & disposal Subfloor repair & leveling Underlayment Installation or refinishing Trim, thresholds & transitions Stair treads & nosings Cleanup & final walkthrough

What affects flooring cost in Baltimore

The material sets the starting point. Carpet and laminate usually cost the least, luxury vinyl plank sits in the middle, and hardwood, tile and natural stone cost the most. Refinishing original wood floors usually costs much less than replacing them. In Baltimore homes, a few things tend to move the number: rowhouse stairs between floors, subfloors that need leveling after years of settling, layers of old flooring that have to come up, and condo underlayment requirements. Every estimate is built from what we find in your home and comes as an itemized proposal.

Good to Know

Frequently asked questions

How much does flooring installation cost in Baltimore, MD?
It depends on the material, the square footage, how many sets of stairs are involved, the condition of the subfloor and how much old flooring has to come out. We measure in your home and give you an itemized estimate before any work starts.
Is luxury vinyl plank or laminate better for a Baltimore rowhouse?
Luxury vinyl plank usually handles moisture better, so it is the safer choice for kitchens, baths and lower levels. Laminate has a wood-based core, feels firm underfoot and works well in dry living areas and bedrooms. Many homes use both, and we help you decide room by room.
Can you refinish the original wood floors in my rowhouse?
Often, yes. If the boards have enough thickness left and the damage is limited, sanding and refinishing keeps the original floor and usually costs less than replacing it. Damaged boards can be replaced and blended in. We check the floor during the in-home visit.
Do you install flooring in condos and apartments?
Yes. Many condo buildings have rules on sound-reducing underlayment, work hours and elevator use, so we review your building’s requirements before we schedule the job.
How long does flooring installation take?
Carpet or LVP in one room usually takes one to two days. Hardwood installation or refinishing for about 1,000 square feet takes three to five days. Tile takes longer because the mortar and grout need time to cure.
Areas We Serve in and Around Baltimore
CantonFells PointFederal HillLocust PointHampdenCharles VillageRoland ParkMount WashingtonLauravilleHamiltonHighlandtownCatonsville

We also install flooring in Towson, Pikesville, Owings Mills, Ellicott City, Columbia and Severn.

Our work across Baltimore County ›

Ready for new floors in Baltimore?

Get a free in-home visit and estimate. We’ll tell you whether to refinish or replace, show you samples and give you a clear, itemized price. Prefer to write? Use our contact page.

Get a Free Estimate Call 410-788-3990
Wall to Wall Construction, LLC · 11 Newburg Ave, Ste 100, Catonsville, MD 21228 · 410-788-3990 · MHIC #123700 · MHBR #6236
Call Request A Quote