Bathrooms

How Much Does a Bathroom Remodel Cost in Maryland?

By Wall to Wall Construction · Catonsville, MD · 8 min read
Remodeled bathroom with walk-in shower and double vanity by Wall to Wall Construction
Short answer

Angi lists a typical bathroom remodel at $6,639 to $17,620, with a national average of $12,122, and a full remodel at $25,000 to $80,000. HomeGuide puts the average remodel at $5,500 to $15,000. Per square foot, the two guides list $70 to $250 and $120 to $275. In older Maryland homes, moving plumbing, replacing old pipes and fixing what turns up under the floor can push a project toward the top of those ranges.

A bathroom remodel can mean a new vanity and paint over a weekend, or a room taken down to the studs with a new layout, plumbing and tile. That is why published averages are so far apart. This guide pulls the numbers from two national cost guides, Angi and HomeGuide, and explains which parts of a project move the price most in the kinds of homes we work in around Baltimore, Howard and Anne Arundel counties.

All figures below are national. Labor rates, permit fees and the condition of your house change the total, so use them for planning, then get an itemized estimate for your own bathroom.

Published cost ranges

Angi breaks costs down by how much of the room changes:

Scope (Angi)Typical cost
Minor refresh$3,000 to $10,000
Partial remodel$10,000 to $25,000
Full remodel$25,000 to $80,000
Luxury full remodelcan exceed $80,000

Both guides also price by type of bathroom:

Bathroom typeAngiHomeGuide
Half bath or powder room$1,500 to $15,000$2,500 to $5,000 (low-end), up to $15,000 (high-end)
Guest or full bath$5,600 to $20,000$6,000 to $15,000 for a complete tear-out
Primary bathroom$8,400 to $30,000$10,000 to $30,000, most around $18,000
HomeGuide lists a high-end bathroom remodel at $25,000 to $40,000, with luxury primary baths reaching $50,000. If you want custom tile, a frameless glass shower and a new layout, plan around the upper rows of these tables, not the national average.

Cost per square foot

Angi lists $70 to $250 per square foot and HomeGuide lists $120 to $275 per square foot, depending on materials, labor and layout changes. Angi’s figures by size:

Bathroom sizeTypical cost (Angi)
25 sq. ft.$1,800 to $6,300
50 sq. ft.$3,500 to $12,500
100 sq. ft.$7,000 to $25,000

Per-square-foot numbers work less well for bathrooms than for other rooms. A toilet, a vanity, a shower valve and an exhaust fan cost about the same in a 40-square-foot hall bath as in a 120-square-foot primary bath, so small rooms often cost more per square foot. For ideas that get more out of a tight room, see our guide to small bathroom remodel ideas.

Bathroom with clawfoot tub, double sinks and blue walls remodeled by Wall to Wall Construction
A clawfoot tub and double sinks. Keeping fixtures where the plumbing already runs holds costs down.

What the main parts of the job cost

Angi says labor makes up 40% to 65% of a bathroom budget, depending on how complex the job is and where you live. These are the line items the two guides list:

ShowerShower remodel: $800 to $5,000 (HomeGuide). Tub-to-shower conversion: $1,000 to $15,000 (HomeGuide).
TubTub replacement: $2,000 to $9,400 (Angi).
VanityNew vanity or cabinetry: $500 to $3,600 (HomeGuide). A custom vanity can add about $10,000 (Angi).
TileRetiling: $10 to $40 per sq. ft., or $1,700 to $3,200 on average (HomeGuide).
Demolition$1,000 to $2,300 (Angi).
PlumbingAbout $7,000 for rough-in on a new bath or major renovation. Changing the floor plan can add up to about $5,000 (Angi).

The pattern is simple: anything that stays where it is costs less than anything that moves. Swapping a vanity in the same spot is a small job. Moving the toilet across the room means new drain and vent lines, opening the floor and, in many homes, the ceiling below.

What raises the cost in older Maryland homes

Much of the housing around Baltimore, Catonsville and Towson was built decades ago, and bathrooms in those houses tend to hide the same problems. These are the items that most often change a budget once the walls are open:

  • Water damage under the tub or toilet. Slow leaks rot subfloors and joists. Angi lists water-damage repair at $3.75 to $7.00 per square foot.
  • Old drain and supply lines. Many homeowners replace aging pipes while the walls are open, because doing it later means tearing out new tile.
  • Out-of-level floors and walls. Large-format tile and frameless glass need flat, plumb surfaces, so framing may need to be shimmed or rebuilt.
  • Venting. Older baths often have no exhaust fan, or one that vents into the attic. Running a duct to the outside takes extra carpentry and roofing or siding work.
  • Electrical. New lighting, heated floors and outlets near water often mean new circuits. Angi lists electricians at $150 to $500 per job.

None of these can be priced exactly until someone looks at the room. A contractor who checks the floor, the pipes and the venting during the first visit can put them in the estimate instead of a change order.

Bathroom with soaking tub, double vanity and stone tile remodeled by Wall to Wall Construction
A primary bath with a soaking tub and stone tile, the kind of project that lands in the upper cost ranges.

Permits

In Maryland, permits are issued locally. In Baltimore City, the Department of Housing and Community Development issues building permits and inspects plumbing and electrical work. Homes in Baltimore, Howard and Anne Arundel counties go through their county permit office. Work that moves or adds plumbing, adds wiring or changes walls generally needs permits and inspections, and requirements differ by jurisdiction, so check for your address or have your contractor do it.

Angi lists bathroom permit costs at $100 to $1,000, and HomeGuide lists $150 to $600 including plan review and inspections.

How long a remodel takes

HomeGuide estimates 15 to 25 days, or 3 to 4 weeks, for a complete bathroom remodel and 1 to 2 weeks for smaller updates. That is construction time. Design, choosing tile and fixtures, ordering and permits come first, and special-order vanities or glass can set the start date. Plan for the bathroom to be out of service for the whole construction period, which matters more in a house with only one full bath.

How to plan your budget

  1. Decide what has to change. Write down what does not work today: storage, the tub, lighting, the layout. That list sets the scope.
  2. Keep the plumbing where it is if you can. It is the single easiest way to control cost.
  3. Choose finishes early. Tile, the vanity and the shower glass make the biggest difference among things you pick.
  4. Hold a reserve for older homes. Leave room in the budget for subfloor, pipe or venting repairs that only show up during demolition.
  5. Compare itemized estimates. A single lump-sum number makes it hard to see what is included. Ask for line items.

If you are planning other work too, our guide to kitchen remodel costs in Maryland uses the same approach, and our luxury bathroom remodel ideas show what the upper end of the range buys.

Key takeaways

  • Angi lists a typical bathroom remodel at $6,639 to $17,620 and a full remodel at $25,000 to $80,000.
  • Per square foot, published ranges run $70 to $275, and small bathrooms often cost more per square foot.
  • Moving plumbing, custom tile and glass, and repairs in older homes move the total most.
  • A complete remodel takes about 3 to 4 weeks of construction, plus design and permits beforehand.

Frequently asked questions

How much does a bathroom remodel cost in Maryland?
National cost guides are the best public benchmark. Angi lists a typical range of $6,639 to $17,620 with a national average of $12,122, and $25,000 to $80,000 for a full remodel. HomeGuide puts an average remodel at $5,500 to $15,000. Older homes, moving plumbing and higher-end finishes push a project toward the top of those ranges.
How much does a bathroom remodel cost per square foot?
Angi lists $70 to $250 per square foot and HomeGuide lists $120 to $275 per square foot. Small bathrooms often cost more per square foot because the plumbing, fixtures and labor do not shrink with the room.
How much does it cost to convert a tub to a walk-in shower?
HomeGuide lists $1,000 to $15,000 for a tub-to-shower conversion. The low end is a prefabricated shower base and surround in the same spot. The high end is a tiled, custom shower with glass, new valves and waterproofing.
Do I need a permit to remodel a bathroom in Maryland?
Permits are issued locally, by the county or by Baltimore City. Work that moves or adds plumbing, adds wiring or changes walls generally needs permits and inspections. Angi lists bathroom permit costs of $100 to $1,000 and HomeGuide lists $150 to $600.
How long does a bathroom remodel take?
HomeGuide estimates 15 to 25 days, or 3 to 4 weeks, for a complete bathroom remodel and 1 to 2 weeks for smaller updates. Design, ordering and permits add time before work starts.

Planning a bathroom remodel?

Wall to Wall Construction designs and builds bathroom remodels across Maryland, including in Catonsville, Towson and Columbia. We will look at the room and the plumbing with you and give you a clear, itemized estimate.

Sources: Angi, how much does a bathroom remodel cost (2026 data); HomeGuide, bathroom remodel cost; Baltimore City Department of Housing and Community Development, permits and inspections. Costs are national figures and vary by project, location, materials and site conditions.
Wall to Wall Construction, LLC · 11 Newburg Ave, Ste 100, Catonsville, MD 21228 · 410-788-3990 · MHIC #123700
Call Request A Quote